AMSOIL PC Series Compressor Oils
 Synthetic PC Series Compressor Oil (ISO 32 through ISO 100, SAE 10W, 20, 30, 40 and 50)
The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO-, ester- and petroleum-based compressor oils. They are not compatible with glycol- or silicone-based compressor oils. Consult us at 800-579-0580 for further information.
Package sizes include:
1-Quart Bottle (PCI and PCK only)
1-Quart Bottles (case of 12) (PCI & PCK only)
5-Gallon Pail; 30-Gallon Drum; 55-Gallon Drum
Call for wholesale pricing or order at 1-800-579-0580
Buy In the Online Store Now.
Printable Product Data Sheet for PC Series Compressor Oils
Complete this form to request the Wholesale buying packet. In a couple days you will have all you need to order at cost online or by phone.
PRODUCT DESCRIPTION
AMSOIL PC Series Synthetic Compressor Oils are long-life, premium compressor lubricants based on novel, proprietary technology. They incorporate the highest quality, thermally-stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. They last up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.
This is one of the most competitive products AMSOIL's sells. The feedback over the years from firms such as General Dynamics, Pilot Chemical and numerous businesses such as tire shops, furniture & wood mills, print shops, has been all great praise. We solve problems and save you time and money!
Improves Compressor Efficiency
AMSOIL PC Synthetic Compressor Oils have low friction properties and resist viscosity increase from oxidation. They help improve operating efficiency and save money on electrical energy consumption.
Control Foam and Reduces Wear
AMSOIL PC Compressor Oils contain anti-foam additives and, unlike other compressor oils, they are anti-wear fortified. Good foam control reduces heat, oxidation and wear. High contact regions are protected against wear for increased compressor life and efficiency.
 Resist Water Contamination
Water from condensation builds up in compressors that can cause unwanted oil/water emulsions, environmental discharge hazards and rust. AMSOIL PC Synthetic Compressor Oils are hydrolytically stable. They resist acid formation, readily separate from water and are anti-rust fortified. Water can be easily drained off for simplified environmental discharge and increased oil life.
Resist Heat and Oxidation
AMSOIL PC Series Compressor Oils combine the inherent stability of premium synthetic base oils with specialized anti-oxidant additives to resist varnish, carbon and acid formation. They protect compressors better and last longer in service than petroleum oils, especially during hot operating conditions.
Safety Advantage
AMSOIL PC Series Synthetic Compressor Oils are ashless, high flash point formulations with very low carbonforming tendencies that minimize the incidence of ignition-promoting “hot spots.” While PC Synthetic Compressor Oils can provide improved fire safety, they cannot be considered non-flammable.
APPLICATION RECOMMENDATION
The appropriate viscosity of AMSOIL PC Series Synthetic Compressor Oil is recommended for use in single and multistage rotary screw, vane, centrifugal and reciprocating compressor crankcase and cylinders, vacuum pumps and other applications such as gears, bearings, blowers, pumps and handheld pneumatic tools. In compressor applications, drain intervals of 8,000 hours or more can be expected under normal operation. Drain intervals are subject to operating conditions and maintenance practices. Monitoring by oil analysis is recommended. For best performance, AMSOIL recommends the compressor be drained prior to the installation of PC Synthetic Compressor Oil. If carbon deposits are present on the internal components, it is recommended they be removed following the compressor manufacturer recommendations.
COMPATIBILITY
Gases: |
• Nitrogen • Hydrogen • Helium • Carbon Monoxide
• Carbon Dioxide (dry) • Ethylene • Methane • Propane
• Butane • Propylene • Butylenes • Natural Gas
• Benzene • Butadiene • Furnace (crack gas)
• Hydrogen Sulfide (dry) • Synthetic Gas
• Sulfur Dioxide. |
Paints: |
• Epoxy • Oil Resistant Alkyd • Acrylic Enamel. |
Plastics: |
• Acetal (Delrin) • ABS • Phenolic • Polyamide-imide
• Polyamide (Nylon)
• Polycarbonate (metal covered only)
• Polyester • Polyetherimide (Nylon) • Polyimide
• Polyphenylene oxide • Polystyrene • Polysulfone
• PTFE (Teflon) • Terephthalate. |
Elastomers: |
• Fluoroelastomer (Viton) • Nitrile (Buna N) • Polyacrylate
• TFE/P • Poly Urethane. |
| Note: Not recommended for “breathing air” or refrigeration compressors. Not recommended for use with polycarbonate plastic that is not metal covered, PVC plastic and butyl, ethylene-propylene or SBR rubber. PC Series Oils are Not Compatible with polyalkylene glycol or silicone oils. Our SIROCCO Compressor Oil is the choice for PAG or polyalkylene glycol type. |
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available upon request.
Keep Out of Reach of Children. Don't pollute. Return used oil to collection centers.
| Synthetic PC Series Compressor Oils |
PCH
ISO 32
SAE 10W |
PCI
ISO 46
SAE 20 |
PCJ
ISO 68
SAE 30 |
PCK
ISO 100
SAE 40 |
PCL
ISO 150
SAE 50 |
| ISO VG - ASTM D-2422 |
32 |
46 |
68 |
100 |
150 |
| VK 100°C - ASTM D-445 |
6.2 |
7.6 |
10.9 |
13.6 |
17.9 |
| VK 40°C - ASTM D-445 |
33.1 |
42.4 |
67.4 |
100.5 |
148.4 |
| Viscosity Index - ASTM D-2270 |
137 |
137 |
153 |
136 |
134 |
| SPGR - ASTM D-1298 |
0.8393 |
0.8408 |
0.8468 |
0.8550 |
0.8602 |
| Density - ASTM D-1298 |
7.989 |
7.001 |
7.051 |
7.119 |
7.163 |
| Flash Point °C (°F) - ASTM D-92 |
264 (507) |
254 (489) |
253 (487) |
260 (507) |
254 (489) |
| Fire Point °C (°F) - ASTM D-92 |
278 (532) |
280 (536) |
280 (536) |
276 (529) |
274 (525) |
| Pour Point °C (°F) - ASTM D-97 |
-53 (-63) |
-48 (-54) |
-40 (-40) |
-45 (-49) |
-42 (-44) |
| Four-Ball Wear Test - ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) |
0.45 |
0.45 |
0.45 |
0.45 |
0.45 |
| Copper Strip Corrosion Test - ASTM D-130 |
1A |
1A |
1A |
1A |
1A |
| Rust Test - ASTM D665 A & B Fresh Water and Synthetic Sea Water |
Pass |
Pass |
Pass |
Pass |
Pass |
| Foam, ml (ASTM D-892) Sequence I, II, III Test End - and After 10 minutes settling |
0/0/0 |
0/0/0 |
0/0/0 |
0/0/0 |
0/0/0 |
| Demulsibility ASTM D-1401 [oil/water/cuff (minutes)] |
40/40/0 (5) |
40/40/0 (5) |
40/40/0 (5) |
40/40/0 (5) |
40/40/0 (5) |
Synthetic PC Series Compressor Oils
(ISO 32 through 150, SAE 10W through 50)
The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO-, ester- and petroleum-based compressor oils. They are not compatible with glycol- or silicone-based compressor oils. Consult Us Here for further information.
Order Online in the store or call for better rates on case and larger sizes. Download the full details on AMSOIL PC Series Compressor Oils.
Compressor Oil Cross-Reference guide.
For more information regarding AMSOIL PC Series Synthetic Compressor Oils, contact Ches Cain at 1-800-579-0580.
You can see a clearer image of these test and the Affidavit by opening the actual Compressor Oil Study PDF
AMSOIL Synthetics Home Page
|
